Zincirler vs triger kayışları vs ERO Joint® triger kayışları
En iyi güç aktarım sistemi hangisidir? Zincir mi, triger kayışı mı yoksa ERO Joint® mekanik olarak monte edilmiş triger kayışı mı?
Sektörde her üç sistem de kullanılmaktadır:
- Zincir: daha esnek (montajı daha kolay, tüm uzunluklarda mevcut)
- Kayış: daha fazla aktarılabilir güç (daha yüksek dönüş hızlarına dayanır), daha temiz (yağlama yok),
- ERO Joint® triger kayışı: kayışların avantajları ve zincir montajının esnekliği (ERO Joint®kayışları makinede bir zincir gibi açık ve kapalı olarak üretilir).
Kayış tahrik sistemine sahip bir bisikletin videosunu izleyin
"Kayışlar Mevcut En İyi Bisiklet Aktarma Organıdır"
Zincir vs Kayış vs ERO Joint® Kayış
| Winner | Comment | |
|---|---|---|
| Easy assembly | ERO Joint® chains and belts | The belts are closed, so it's easier to assemble an open chain and close it in the machine than a closed belt. ERO Joint® belts are delivered open and closed on the machine. It is therefore just as easy to assemble an ERO Joint® belt as a chain. |
| Repairability | Chains | A chain can be repaired using a replacement link. The belt must be completely replaced. |
| Efficiency | Belts | Belts weigh less than chains. Better efficiency. |
| Durability | Belts | Belts generally last at least twice as long as chains. ERO Joint® belts can last as long as closed belts, under certain conditions. |
| Maintenance | ERO Joint® belts and belting systems | The belt requires no lubrication and generally no tension adjustment. |
| Price | The winner depends on the application | |
| Weight | ERO Joint® belts and belting systems | |
| Noise | ERO Joint® belts and belting systems | Belts are quieter than chains. ERO Joint® generates no additional noise on the belt. |
| Cleanliness | ERO Joint® belts and belting systems | Belts don't need lubrication. The chain needs lubrication, and the dust agglomerates, generating dirt. |
| Available sizes | ERO Joint® chains and belts | All chain lengths can be made by adding links. ERO Joint® belts can be manufactured in any length and width. Closed timing belts are only manufactured to a certain standard length. |
| Temperature resistance | Chains | The general temperature range for belts is -30 to +80°C. The temperature range for chains is wider. |
| Chemical resistance to water, acid, oil, UV, chlorine, etc... | Belts | The belt can be made from a variety of materials (rubber, PU, ....), allowing more possibilities than chains. |